Connect Ductwork - Best IS170 Mode D'emploi

INSTALLATION OF GLASS
FRAME
(Optional)
Purchase a Glass Frame from your dealer
(Model GSIS170).
1. Fit the glass frame above the hood.
2. Fit the supplied adhesive pads on the glass
frame in correspondence to its fixing screws
in order to prevent the glass from breaking.
3. Fix the (3) supplied brackets to the hood
with mounting screws (3.9x6mm).
4. Adjust the position of the glass frame and
fix it by means the mounting screws
(M4x20mm).
Please be very careful not to hit the glass
with any objects made of porcelain, metal,
glass or anything else that is very heavy.
MOUNTING SCREWS
(3.9x6mm)
SUPPLIED
BRACKETS

CONNECT DUCTWORK

1. Position the hood near the lower part of
the support frame and connect the duct to
the duct collar.
2. Use 6" round metal duct to connect the
duct collar on the hood to the ductwork
above.
3. Use duct tape to make all joints secure and
air tight.
MOUNTING SCREWS (M4x20mm)
ADHESIVE
PADS
DUCT COLLAR
- 9 -
GLASS FRAME
DUCT 6"