Joie tilt Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. While pressing the child
restraint firmly into the vehicle
seat, pull the vehicle shoulder
belt to fasten the child restraint
tightly and securely.
18
!
Please check if the child
restraint is installed tightly by
moving the child restraint
back and forth at the vehicle
belt path (child restraint
should not move more than
25mm/1").
!
The child restraint cannot be
used if the vehicle safety belt
buckle (female buckle end) is
too long to anchor the child
restraint securely.
- 3
18
6. Press button to open the
locking clip.
19
7. Thread the diagonal belt
through the locking clip, and
then fasten the locking clip.
15
18
3
19
20
20
8. While pressing the Car seat,
pull the belts to fasten the Car
seat tightly and securely.
21
9. Unlock the device first
- 1
22
and slip it as close as possible
to the buckle.
- 2
22
10. Refasten the locking clip.
21
22
23
23
16

Publicité

Table des Matières
loading

Table des Matières