Joie tilt Mode D'emploi page 14

2. Buckle the vehicle belt.
41
!
The child restraint cannot be
used if the vehicle safety belt
buckle (female buckle end) is
too long to anchor the child
restraint securely. - 1
41
3. While pressing the child restraint
firmly into the vehicle seat, pull
the vehicle shoulder belt toward
the retractor to fasten the child
restraint tightly and securely.
25
41
1
42
42
43
4. Open the lock-off device and insert the vehicle shoulder belt
through it. Close the lock-off device onto the vehicle shoulder
belt.
43
!
Please check if child restraint is installed tightly by moving
the child restraint back and forth at the vehicle belt path.
(Child restraint should not move more than 25mm/1").
26