OVEN TEMPERATURE ADJUSTMENT
This oven may cook differently than the one it replaced.
Use the oven for a few weeks to become more familiar
with it before changing the thermostat settings.
If the oven consistently undercooks or overcooks follow
these instructions to adjust the thermostat.
NOtE
Don't use thermometers, such as those found in
grocery stores, to check the temperature setting of
the oven. Instead, begin by raising or lowering the
thermostat 15°F (8°C). Try the oven for a week with
the new setting and adjust again if needed, using
the first adjustment as a gauge.
Adjusting the Oven Temperature
1. Set Oven Mode knobs to the OFF position.
2. Touch and hold START TIME for 3 seconds. Then
touch START TIME repeatedly until AJ appears in the
display.
3. Turn the Time/Temp knob to set the amount of
temperature adjustment desired. Touch START TIME
to toggle between positive and negative values.
Example : To increase the thermostat by 15 degrees,
turn the knob clockwise to select 15.
To decrease the thermostat by 15 degrees, turn the
knob clockwise to select 15, then touch START TIME
to select a negative value (-15).
4. Touch START to accept the change.
NOtE
• This adjustment will not affect the broiling or Self
Clean temperatures. The adjustment will be
retained in memory after a power failure. The oven
temperature can be increased (+) or decreased (-) as
much as 35°F or 19°C.
• Once the temperature is increased or decreased,
the display will show the adjusted temperature until
it readjusts.
• The thermostat adjustment for Bake will also affect
Convection Bake, Convection Roast, Roast or Crisp
Convection.
LANGUAGE
The default language of the display is English. It can be
changed to Spanish or French.
1. Set Oven Mode knobs to the OFF position.
2. Touch and hold START TIME for 3 seconds. Then
touch START TIME repeatedly until Lng appears in
the display.
3. Turn the Time/Temp knob to set the desired
language.
4. Touch START to accept the change.
PREHEATING ALARM LIGHT
When the oven reaches its set-temperature, the preheating
alarm light flashes until the oven door is opened. You can
activate or deactivate the preheating alarm light.
1. Set oven mode knobs to the OFF position.
2. Touch and hold START TIME for 3 seconds. Then
touch START TIME repeatedly until PrE appears in
the display.
3. Turn the Time/Temp knob to enable or disable the
feature.
4. Touch START to accept the change.
13
fEAtURES