Convection Bake - Hamilton Beach 31151 Mode D'emploi

840182000 ENv13.qxd:Layout 1

Convection Bake

1
Press CONV button which will illuminate
along with the temperature button. The
LED will flash the default temperature of
400°F. NOTE: After first use, the last
temperature setting will be the default.
1 2
5
8
6/8/10 2:33 PM Page 8
Fire Hazard.
w WARNING
• If contents ignite, do not open oven door.
Unplug oven and allow contents to stop
burning and cool before opening door.
2
Rotate selector knob to desired tempera-
ture. Press PUSH TO START. Unit will
beep once, Preheat LED will light, and
unit will preheat.
To adjust the time or temperature
DURING the Convection Bake cycle,
press the Timer (1) or Temperature (2)
button. LED will flash. Rotate selector
knob to adjust the time or temperature.
Press PUSH TO START.
NOTE: To cancel or select another
function, press the STOP/CANCEL
button.
• Do not use oven cooking bags.
• Always allow at least 1 inch between food
and heating element.
• Always unplug toaster oven when not in use.
3
The unit will sound 3 short beeps when
it is preheated and the Preheat LED will
de-energize. Place food into oven.
6
4
Press TIMER button to set bake time. The
LED will default to 25 minutes and display
"0:25." Rotate selector knob to set the
desired baking time in 1-minute increments.
Once a bake time has been selected, press
PUSH TO START.
At the end of the timed baking cycle, the
oven will beep and shut off. Remove food
using oven mitts. Unplug from outlet
when finished.
NOTE: The oven is equipped with a
2-hour auto shutoff timer. If timer is not
set, the unit will begin to count down
from 2 hours, including preheat time, and
then shut off.