U S I N G YO U R TOA S T ER OV EN
TO USE THE PRE-HEAT FUNCTION (SEE FIG. 4)
1. Select desired oven rack position. (See "Positioning Rack" Section)
2. Close the oven door.
3. Turn the function selector knob "
"Precalentar" position. Both the top and bottom heating elements
will operate.
4. Turn the temperature control knob "
5. Set the timer knob "
the timer for 5-8 minutes for the oven to pre-heat.
6. When pre-heating is completed, select the desired function and
follow the instructions below.
TO USE THE BAKE/WARM FUNCTION (SEE FIG. 5)
1. Select desired oven rack position. (See "Positioning Rack" Section)
2. Arrange food on one of the wire racks or in the baking pan.
3. Close the oven door.
4. Turn the function knob "
Only the bottom heating elements will operate. (The heating
elements will cycle ON and OFF to maintain temperature.)
5. Turn the temperature control knob "
6. Turn the timer knob "
set for up to 60 minutes [and additional 60 minute increments as
desired]. The interior light turns on when timer is on. At the end
of the cooking time, a bell signal sounds, and the oven turns off
automatically.
7. When warming is completed, open door fully and remove food
carefully with oven mitt.
WARNING: Cooked food can be very hot, especially pastry fillings.
Handle with care.
" to the PRE-HEAT
" to the desired temperature.
" to desired time. It is recommended to set
" to the BAKE/WARM "
" to the desired temperature.
" to the desired time. The timer can be
English-5
Figure 4
" position.
Figure 5