Loading Paper - Sagem PHOTO EASY 155 Livret D'utilisation

L
OADING PAPER
Protection sheet
1 - Pull the paper tray out of the printer.
2 - Open a pack of paper with the protection sheet on the top, insert it in the paper tray, making sure the
rectangle reserved for postage stamps is on the outside of the tray, that is, towards you.
3 - Remove the protection sheet.
4 - Line up the tray with its compartment and push it in slowly until the locking system clicks.
Warning -
handle paper sheets by their pre-cut edges, never allow your fingers to come into contact
with the shiny surface before printing.
Your SAGEM PHOTO EASY 155 printer is now ready to print your digital photographs.
Warning -
protect consumable items against prolonged exposure to light, humidly, heat and dust.
Respect the operation conditions set out (Refer to paragraph Technical data, page -29).Only use
SAGEM brand consumable items designed for this printer. Make sure that a previously printed
photograph has not been slipped inadvertently into a packet of blank pages; this could damage the
ribbon of your printer.
Warning -
Make sure that a previously printed photograph has not been slipped inadvertently into
a packet of blank pages; this could damage the ribbon of your printer.
- 6 -