Print Starting From A Bluetooth Peripheral (Optional) - Sagem PHOTO EASY 155 Livret D'utilisation

When the transfer is complete, the following information is displayed on the screen:
You can now:
• Start printing the transferred photograph, after setting the print format and number of copies
if required.
• Transfer another photograph from your GSM mobile phone camera, which will be added to
those already stored in the printer. At the end of each transfer, the total number of photogra-
phs stored is displayed on the printer screen (the one with the highest number being the last
one transferred).
• The same operations as described in the previous chapters can now be performed before
starting to print the photographs: (selecting the photographs to be printed, selecting the for-
mat, selecting the number of copies).
After all photographs transferred from your GSM mobile phone camera have been printed, the
SAGEM PHOTO EASY 155 printer screen displays the information that was on the screen just
before you started the print job.
You can now:
• Start another print job, after selecting different parameters (photograph number, format,
number of copies) if required.
• End the transferred photograph processing. To do this, hold the
seconds.
P
RINT STARTING FROM A BLUETOOTH
PERIPHERAL
The adapter of Bluetooth (optional equipment) printer is a fast and effective solution to pass from
a telegraphic connection to a connection without wire.
The adapter makes it possible to transform printing SAGEM PHOTO EASY 155 into Bluetooth
receiver thus authorizing equipment equipped with technology Bluetooth like the personal
assistants, the office computers, portables or others the impression of photographs.
Ensure that all hardware units are powered. Never force installation of connectors on hardware,
as the cable and the connector could be damaged.
(
OPTIONAL
- 19 -
key down for 2
C
)