Print From A Pc (Personal Computer); Install The Software - Sagem PHOTO EASY 155 Livret D'utilisation

When the transfer is complete, the following information is displayed on the screen:
You can now:
• Start printing the transferred photograph, after setting the print format and number of copies
if required.
• Transfer another photograph, which will be added to those already stored in the printer. At
the end of each transfer, the total number of photographs stored is displayed on the printer
screen (the one with the highest number being the last one transferred).
P
RINT FROM A
Your kit includes an installation CD-ROM containing a printer driver, image processing
software.
Make sure that your PC is compatible with the requirements as specified :
PC configuration required:
Pentium or equivalent,
OS : Windows 98 SE / 2000 / Me / XP,
128 MB DRAM or more,
150 MB available on hard disk,
USB port available.

Install the software

The SAGEM PHOTO EASY 155 software is installed in three steps: running the Install program,
restarting the computer, and performing the final printer installation.
Do not connect the printer to the PC before installing the printer driver. After you have
installed the software, a message will be displayed asking you to restart the PC. After
restarting you can connect the printer to the PC.
Insert the CD-ROM in the drive to start installation. A command window appears. Follow the
instructions displayed on the screen.
If the installation program does not start automatically, you can start it by double-clicking on the
"setup.exe" file located in the CD-ROM root directory.
PC (P
ERSONAL
- 21 -
C )
OMPUTER