4
P
RINTING FROM A MEMORY CARD
Your SAGEM PHOTO EASY 155 printer is designed to be used with or without a computer. This
chapter describes printer operation without a computer.
Refer to the technical data table at the end of thi user manual to check whether your memory card
is compatible with the printer. In the event of incompatibility, use a computer and the image
processing software supplied on the CD-ROM.
Warning -
(for example: an image size 320 x 240, equivalent to 76,800 pixels, will not be included in the
index). On the other hand, these photographs may be printed from a PC or by means of a wireless
IR link (or Bluetooth optional equipment).
Insert your memory card into the corresponding slot, as shown in the illustrations below. Into the
case of a xD card, introduce initially the adapter provided into the left slit then insert the card in
the adapter.
Warning -
Warning -
DO NOT USE FORCE UNDER ANY CIRCUMSTANCES.
If a card does not enter properly, remove it and check that you are introducing it in the
correct slot and with the right orientation.
Small sized images, less than 80,000 pixels, cannot be printed from memory cards
I
NSERT A MEMORY CARD
SmartMedia, CONTACTS FACING UPWARDS.
The memory cards do not enter fully in the reader slot.
Slot compatible with
Smart Media (SM),
Memory Stick (MS),
Standard Digital (SD)
Multi Media Card (MMC) formats
or
XD card with its adapter
- 7 -
Slot compatible with
Compact Flash format