Live Test - PCWork PCW02A Mode D'emploi

Live Test

1. Turn the rotary switch to the measurement function "
select the LIVE test function with the "FUNC." button. The display
will show "LIVE" and four bars.
2. Insert the red probe in the "
probe's tip with the measuring voltage source.
3. If the device locates voltage, the indicator lights up green and the
display shows "LIVE", while the buzzer sends out acoustic
signals.
WARNING:
•
Do not measure voltage above DC 1000V or AC 750V;
otherwise the instrument might get damaged.
•
Remove all probes from the input sockets.
•
Pay special attention to safety when measuring high voltage
to avoid electric shock or personal injury.
•
The Live test is only a first indication and cannot replace
voltage measuring.
" socket, then connect the
29
" and