Live-Test - PCWork PCW02B Mode D'emploi

Live-Test

1. Press the button to turn on the device, press the
and choose the
with the " " button. The display will show "LIVE".
2. Insert the red probe into the
black probe is removed from the "COM" input socket. Connect
the red probe's tip with the measuring voltage source.
3. When the meter senses weak AC signals, the indicator lights up
green, while the buzzer sends out slow-paced acoustic signals.
The display will show "--- L".
4. When the meter senses strong AC signals, the indicator lights up
red, while the buzzer sends out fast-paced acoustic signals. The
display will show "--- H".
WARNING:
•
Do not measure voltage above 600V; otherwise the
instrument might get damaged.
•
Remove the black probe from the input socket.
•
Pay special attention to safety when measuring high voltage
to avoid electric shock or personal injury.
•
The Live test is only a first indication and cannot replace
voltage measuring.
function. Then select the LIVE test function
input socket and ensure that the
23
button