PCWork PCW02A Mode D'emploi page 17

WARNING:
•
Do not measure voltage above 10V; otherwise the instrument might get
damaged.
•
Never measure voltage if probes are in current measurement sockets. This
could result in electric shock for the user and damage the device.
•
Pay special attention to safety when measuring high voltage to avoid electric
shock or personal injury.
•
Always test known voltage before using the device, to ensure that device
functions properly.
•
Do not touch the bare tips of the probes; when measuring is finished, always
remove the probes from the measuring object and the device.
Caution:
To avoid damaging the device or the equipment, do not connect a frequency or
duty cycle signal greater than 10V true value.
17