PCWork PCW02A Mode D'emploi page 12

FUNC. Button
When there are multiple measurement functions available, press the "FUNC." button to
select the desired option.
Auto Power Off
•
If there is no operation for 15 minutes , the device will turn off automatically to save
power. After an automatic shutdown, press any button to turn the device on again.
•
If you press the "FUNC." button and turn on the device, the automatic shutdown
function will be disabled. After turning off the device, the automatic shutdown
function will be enabled again for the next measuring session.
True RMS
This device measures values in "True RMS".
Input LED Indication Function
When the device is turned on or the user switches functions, the corresponding input
sockets for the chosen measurement function will be illuminated. The flashing light
indicates the correct input sockets for the probes.
High Voltage/Current Indication Function
When the measured voltage is greater than 80V or the measured current is greater
than 1A, the orange backlight of the display will light up, prompting users to be careful.
Data Hold Button
Press the "HOLD" button to record data. Press it again to exit the hold function.
12