Ac/Dc Voltage - PCWork PCW02A Mode D'emploi

AC/DC Voltage "V / mV" Measurement
1. Turn the rotary switch to the measurement function "
" " and select either the AC or the DC voltage function with
the "FUNC." button.
2. When dealing with an unknown voltage range, always start
with the higher measurement range "
lower range "
3. Insert the red probe in the "
probe in the "COM" socket.
4. Connect the probes' tips (red probe is the positive pole, black
probe is the negative pole) in parallel to the measuring circuit,
measure the voltage.
5. The measurement result is displayed on the screen. When
measuring AC voltage the frequency is displayed on the screen
simultaneously.
", if applicable.
" socket and insert the black
", then switch to the
14
" or