Gima 2246A Manuel D'utilisation page 13

13
DESCRIPTION
1 Backrest moves up
2 Backrest moves down
3 Whole bed moves up
4 Whole bed moves down
5 Seat cushion up
6 Seat cushion down
7 (The right) footrest moves up
8 (The right) footrest moves down
9 (The left) footrest moves up
10 (The left) footrest moves down
11 Enter the memory position setting (Option)
12 Indicator light of memory setting (Option)
13 Memory position setting 1(Option)
14 Safe-lock button
15 Safe-lock button light
Memory position setting 2
16
(Option)
17 Power indicator
18 One-key reset button
19 Indicator light of heating function (Option)
20 Heating (Option)
Notes:
1. The memory position setting is only available for the models with memory function.
2. The heating function is only available for the models with heating function.
3. Different hand controllers should be chosen according to different configuration.
OPERATION
Backrest goes up smoothly by pressing the button.
Backrest goes down smoothly by pressing the button.
The bed goes up smoothly by pressing the button.
The bed goes down smoothly by pressing the button.
Seat inclining smoothly by pressing the button.
Seat goes flat smoothly by pressing the button.
Press the button, the right footrest will move up, its angle will be re-
duced to minimum.
Press the button, the right footrest will move down, its angle will be
moved to maximum.
Press the button, the left footrest will move up, its angle will be reduced
to minimum.
Press the button, the left footrest will move down, its angle will be
moved to maximum.
The indicator light turns on after pressed the button for 2 seconds, then
enter the memory position setting state.
1. Pressing the button "SET" for 2 seconds to enter the memory po-
sition setting state, the memory position setting indicator is on. Set
the position you need, and pressing the button "Ml", the actions are
set into memory. Exiting the memory position setting state and the
indicator goes off.
2. Press the button to move to the memory action state automatically.
Keep pressing the "safe-lock button" for about two seconds, lighting up
the green light around the button, all the buttons can not be operated
except safe-lock button . Keep pressing the safe-lock button for about
two seconds again, the green button lights go out, all the buttons return
to normal operation status.
1. Pressing the button "SET" for 2 seconds to enter the memory po-
sition setting state, the memory position setting indicator is on. Set
the position you need, and pressing the button "M2", the actions are
set into memory. Exiting the memory position setting state and the
indicator goes off.
2. Press the button to move to the memory action state automatically.
Hand controller are connected with power supply properly, indicator
light is on. Otherwise, it won't light.
Press the button, the backrest angle will automatically move to the
maximum, the seat cushion angle will automatically move to flat,
footrest will move down to the maximum, the height of the bed will
automatically reach the lowest position.
Pressing the button, the light is on, the heating function works; pressing
the button again, the light is off, the heating function stops.
ENGLISH