Senix GTSX5-M-0 Manuel D'instructions page 13

5. Position the lines in the spool holding slots.
6. Install the spool in the cutting head. Replace the
spool cover.
Examine the unit thoroughly for worn, loose or damaged
parts. If you need to repair or replace a part, contact
Senix customer service at 1-800-261-3981.
to secure the unit while transporting.
battery completely before long-term storage.
unauthorized persons in a well-ventilated, dry and
frost-free environment.
Shorting the battery terminals together may cause
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
provide added protection.
Remove the battery before transporting. Transport the
unit in a horizontal position with the engine at the top.
Secure the unit to prevent damage during transport.
Remove the battery pack from the string trimmer.
Cover the terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery pack
or remove any components. This product contains
lithium-ion batteries which must be recycled or disposed
of properly. Local, state or federal laws may prohibit
disposal of these batteries in ordinary trash.
The RBRC seal on the li-ion battery pack indicates
that the costs to recycle the battery pack at the
end of its useful life has already been paid by The
Great States Corporation American Lawn Mower
Company. It is illegal to place spent li-ion batteries in
the local municipal solid waste or in thetrash. RBRC
in cooperation withThe Great States Corporation
American Lawn Mower Company has provided an
environmentally friendly and easy way to recycle spent
li-ion batteries. Just contact your local recycling center
or call 1-800-BATTERY for information on where to drop
off the spent battery.
WWW.SENIXTOOLS.COM
13