Sangean TUN PAD DPR-202BT Mode D'emploi page 13

Playing audio files in Bluetooth mode
When you have successfully connected your radio with the chosen Bluetooth device you
can start to play your music using the controls on your connected Bluetooth device.
1. Once playing has started adjust the volume to the required setting using the Volume
buttons on your radio or on your enabled Bluetooth device.
2. Use the controls on your device to play/pause and navigate tracks. Alternatively,
control the playback using Play/Pause (
buttons (
Note:
1) That not all player applications or devices may respond to all of these controls.
2) When your music is playing through your radio and you receive a call on your phone,
your radio may temporarily mute their Bluetooth audio streaming when they receive
calls, text messages, emails or for other reasons unrelated to audio streaming. Such
behaviour is a function of the connected device and does not indicate a fault with your
radio.
Radio memory and reconnecting a device
TunPad can memorize up to 8 sets of paired device, when the memory exceed this
amount, the oldest pairing history will be over written.
If your Bluetooth device already paired with the radio previously, the unit will memorize
your Bluetooth device and it attempts to reconnect with a device in memory which is last
connected. If the last connected device is not available, the radio will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pair button for 2-3 seconds to disconnect with your
Bluetooth device. The Bluetooth status indicator flashes in blue indicating the radio is
discoverable again for pairing.
Pairing and playing your device via NFC
Your radio is equipped with wireless NFC (Near Field
Communication) feature, allowing NFC-enabled devices
to pair and play the music with yourTunPad. For non-NFC
devices, please refer to the above sections for standard
Bluetooth pairing.
1. Turn on the NFC feature on your device.
2. Touch the NFC area of your playing device directly against
the NFC tag marked on the right side of your TunPad.
The radio will automatically be switched on and connect
your NFC-enabled device. If you pair with TunPad for the
first time, some NFC-enabled device will be asked the
permission to link with the radio. Once paired with a device,
'Connecting TunPad...' or a similar message is shown on
your NFC-enabled device. The Bluetooth status indicator
will light in solid blue. (Important: Please make sure the
screen of your playing device is on and unlocked to allow
NFC to work.)
12
) on the radio.
), Next track ( ) , Previous track