Service Parts - Kohler K-5848 Instructions D'installation

Position and align the sink with the countertop cutout.
Rotate the clamps over the sink rim, and carefully tighten
them until they are just snug.
Check the alignment of the sink with the cutout. Then
securely tighten the clamps.
Wipe away any excess sealant with a clean, dry cloth.
Allow the sealant to set for 30 minutes or more before
proceeding. Follow all instructions listed on the sealant
label.
Connect the drain fittings and the faucet supply fittings.
Turn on the water supplies, and check for leaks at all
connections. Tighten or repair any connections that leak.

SERVICE PARTS

NOTE: Part numbers listed refer to service parts and may not correspond to production part numbers
packed with fixture. Order by service part number only.
ITEM PART
NO. NO. DESCRIPTION
1 44596 Anchor
2 44597 Clamp
3 44598 Screw
4 68918 Screw
Kohler Co., Kohler, WI U.S.A.
Clamp
Screw
Nut
Gasket
1
2
3
5
Bottom View
Fig. #9
Countertop
Sealant
Sink
Fig. #10
Gasket
Nut
Fig. #11
4
1007290-2-A