Kohler K-5848 Instructions D'installation page 4

Drill the required faucet holes, and install the faucet to the
countertop according to the faucet manufacturer's
instructions.
Equally space the required number of clamps, and locate
the clamp-mounting holes on the underside of the
countertop (the required number of clamps is listed in the
chart on Page 2).
For installation to solid, non-wooden countertops, drill 3/8"
diameter holes 5/8" (1.6cm) deep to accommodate the
anchors provided. Install the anchors flush with the
countertop bottom surface. Install the clamps.
Turn the clamps parallel to the opening to allow for easy
installation of the sink.
Clean the top of the sink rim with a non-abrasive cleaner
(see Important Consumer Information on Page 6).
Clean the underside of the countertop around the cutout
area, making sure the surface is smooth, clean, and free
of defects.
Apply a generous bead of sealant to the top surface of the
sink rim.
1007290-2-A
Countertop Opening — Bottom View
Clamp
Screw
4
Fig. #6
Anchor
Edge
Countertop
Opening
2-1/8" (5.4cm)
1/8" (3mm)
Fig. #7
Fig. #8
Kohler Co., Kohler, WI U.S.A.