Cd Player Features - Numark MIX 1 Guide D'utilisation Rapide

CD PLAYER FEATURES

1. OPEN/CLOSE (Disc Tray Open/Close) – Press to load or
eject the disc. Each press will open or close the disc tray on
the transport.
NOTE: Tray will not open unless the disc has been paused.
Tray will automatically close after 30 seconds.
2. TIME (Time Button) – Switches the time display between
elapsed playing time and remaining time on the track and
remaining time on the entire CD.
3. CONT/SING – Will cause just a single track to play or all
tracks in order by pressing once or twice.
4. LCD DISPLAY – Indicates all the functions, as they are
occurring, with the CD. These functions are explained in the
next section.
5. TRACK (Track Buttons) – Used to select the track to be played.
6. Track 10 Button – This button is for quickly advancing to higher tracks on a CD.
7. PROGRAM – Depress this button and the unit will stop and the program indicator will light. Select each track to be
programmed and press the PROGRAM button between selections. You can program up to 20 tracks. Press PLAY to
start the program. To exit and erase program, either hold the program button down for more than 2 seconds while the
unit is stopped, open the disc tray, or turn off the power.
8. PITCH (Pitch Button) – Activates the Pitch Slider.
9. PITCH SLIDER – The pitch can be changed up to +/-12% by pressing the PITCH button so the PITCH LED is lit, then
moving the sliding fader. The pitch will not be changed if the PITCH LED is off.
10. SEARCH WHEEL (OUTER RING) – 3 forward and 3 reverse speed positions for searching through songs. The more
you turn the wheel in either direction the faster you search through the music.
11. PITCH BEND/JOG WHEEL (INNER RING) – The jog wheel serves 2 functions depending on the current mode.
a) The jog wheel will control a slow frame search when the CD is not playing. To set a new frame cue point, spin the
wheel then press play when you have determined the proper position. Press CUE to return to the "CUE POINT".
b) When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be
matched after the pitch of each disc is matched. Either player can "catch up" or "fall back" to match the other
player. The jog wheel will temporarily bend the pitch of the music if the song is already playing by rotating the
wheel clockwise to speed up or counterclockwise to slow down. By changing the pitch of one disc with respect to
the pitch of the other disc, the beats can be matched.
12. CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is
used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the
CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is
pressed until the CD has been reset to the position at which play was started. Steady lighting of this LED indicates the
ready condition.
13. START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play
to pause or from pause to play.
14. BPM/PITCH BUTTON - Switches the mode of the display between showing the BPM and the percentage change in
pitch.
15. TAP BUTTON - Tap this button with the beat of the music to determine the current Beats Per Minute (BPM).
LCD FEATURES
1. PLAY: Active while the unit is actually playing a CD.
2. PAUSE: Active when the unit is paused.
3. CUE: Flashing when the unit is setting a cue point. Lit continuously
when the unit is paused at a cue point.
4. PROGRAM: Used for pre-programming the track order to
automatically be played by the unit. This is a great function if you
need to leave the CD player alone.
5. TIME MODE: (Elapsed) is for showing time as it is taking place.
(Remain) shows how much time is left on a particular track. This
function is controlled by the TIME BUTTON.
6. SINGLE: Shows when the unit is set to play just one track at a time. When this is not lit, the CD will play continuously
through all tracks. This function is controlled by the SING/CONT BUTTON.
7. PITCH: Is lit when the PITCH BUTTON is active.
8. TIME BAR: Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.
9. PITCH/BPM: Shows the percentage change in pitch or current BPM.
10. TRACK: Shows the current track that the unit is playing.
11. MINUTES: Shows the minutes elapsed or remaining depending on mode setting.
12. SECONDS: Shows the seconds elapsed or remaining depending on mode setting.
13. FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
5