Table des Matières
Publicité
MAINTENANCE INSTRUCTIONS Continued
To remove grease that has baked on, apply cleanser to a
damp cloth or sponge and rub cleanser on the metal. NEVER
RUB WITH A CIRCULAR MOTION. Soil and burnt deposits
which do not respond can usually be removed by rubbing
the surface with Scotch-Brite scouring pads or Stainless
scouring pads. DO NOT USE ORDINARY STEEL WOOL.
PARTS AND SERVICE
It is easy to keep your Garland equipment working in top
condition.
Part # 4519762 (12/07)
Heat tint can be removed by a vigorous scouring in the
direction of the polish lines using Scotch-Brite scouring pads
or a Stainless scouring pad in combination with a powdered
cleanser.
Technical information and/or parts literature is available
through your local Authorized Garland Service Agency or
direct from Garland.
Page 13
Publicité
Table des Matières
