Assembly instructions
IMPORTANT!!
Please fill in the warranty certificate completely and correct. Page 10.
First read the safety precautions that accompany the BERG trampoline before you start to assemble
it. Please pay particular attention to the photos.
The BERG trampoline can be assembled without special tools.
Wear protective gloves to prevent any injuries during assembly.
• Safety Precautions
-
The BERG trampoline is designed to be installed on a soft, flat surface such as grass
or sand, with a surrounding clear area of at least 2 metres. Placing on a hard and/or
smooth surface is not permitted for safety reasons.
-
There must be a clear space of at least 2 metres all around the BERG trampoline,
free of trees, fences or any other obstacle.
-
Above the BERG trampoline, there must be clear space to a height of at least 7
metres from the surface on which the BERG trampoline is standing.
• Pack contents
BERG Elite
11 ft (330)
8 round section rails
8 leg sections
4 lower legs
72 springs
1 protective pad
1 spring mat
-
1 spring tightener
2 protective surrounds
1 manual
BERG Elite
14 ft (430)
8 round section rails
8 leg sections
4 lower legs
96 springs
1 protective pad
1 spring mat
1 short ladder
1 spring tightener
2 protective surrounds
1 manual
2