Parker SCFT Mode D'emploi page 66

Connecting the Turbine
TIPS
► Connect the turbine in the direction indicated on the rating plate in order to
achieve a higher level of measuring accuracy.
► Connect the turbine at a point on the hydraulic circuit which is exposed to
as little vibration as possible so that measurement results are not falsified.
► Install a 25 micron filter in the hydraulic circuit upstream from the turbine
to prevent impurities.
► The diameters of the inlet and outlet connections should be similar to
the diameter of the turbine connections to prevent Venturi or constriction
effects.
► Due to the integrated flow straighteners, you can reduce the normal rec-
ommended length of the straight hose section of 10 times the hose diam-
eter to 8 times the hose diameter (d).
66
8 x d
d
V1.0/04/14