Information On Disposal And Recycling; Troubleshooting; Checking The Power Supply; Check Operation Of The Twilight Sensor - Videotec GEKO IRH Manuel D'instructions

8 Information on disposal
and recycling
The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE) mandates
that these devices should not be disposed of in the
normal flow of municipal solid waste, but they should
be collected separately in order to optimize the
recovery stream and recycling of the materials that
they contain and to reduce the impact on human
health and the environment due to the presence of
potentially hazardous substances.
The symbol of the crossed out bin is marked
on all products to remember this.
The waste may be delivered to appropriate collection
centers, or may be delivered free of charge to the
distributor where you purchased the equipment at
the time of purchase of a new equivalent or without
obligation to a new purchase for equipment with size
smaller than 25cm (9.8in).
For more information on proper disposal of these
devices, you can contact the responsible public
service.

9 Troubleshooting

9.1 Checking the power supply

Check that the unit is supplied with a voltage
between 12-24Vdc or 24Vac +/- 10%.
9.2 Check operation of the
twilight sensor
Check operation of the twilight sensor by darkening
it with black tape.
Leave the telemetry connection open.
MNVCIRHS_2222_EN

10 Technical data

10.1 General

Die cast aluminum body
Supplied complete with horizontal and vertical
rotating support in painted galvanized steel
Wavelengths: 850nm, 940nm, white light

10.2 Mechanical

Dimensions: 133x112x135mm (5.2x4.4x5.3in)
Unit weight: 0.9kg (2lb)

10.3 Electrical

Supply voltage/Current consumption:
• from 12Vdc up to 24Vdc:
1A max (high power 4 LED, 12Vdc), 0.5A max (high
power 4 LED, 24Vdc) or 0.5A max (low power 2
LED, 12Vdc), 0.25A max (low power 2 LED, 24Vdc)
• 24Vac:
0.5A max (high power, 4 LED) or 0.25A max (low
power, 2 LED), 50/60Hz
State of the art SMD LED
Adjustable built-in photocell for automatic activation
and deactivation
Input for activation by means of external dry contact
Supplied with multipole cable: 4x0.34mm² (22AWG),
L=2m

10.4 Illuminators

GEKO IRH - BEAM PATTERN AND ACHIEVABLE DISTANCES FOR ONE
ILLUMINATOR
Horizon- Maximum distance
tal and
850nm,
vertical
low
beam
power
patterns
10˚ 100m
(328ft)
30˚ 60m (197ft) 84m (276ft) 60m (197ft) 60m
60˚ 40m (131ft) 56m (184ft) 40m (131ft) 40m
Tab. 3 The distances and the performance depend on the
camera/lens used and on the environmental light
conditions.
1 Achievable distances with camera in Day mode
(colour image)
850nm, 940nm, White
high high light,
power power high
power
140m 100m –
(460ft) (328ft)
(197ft)1
(131ft)1
9