Installation And Start-Up; Installation - Chopin SDmatic Mode D'emploi

GB
2. INSTALLATION AND
START-UP
3
4
8
52

2.1 Installation

■ Unpacking
❏ The apparatus is delivered in a special packaging. It is
recommended to keep this packaging for future use (transfer from
one site to another, or return to CHOPIN for periodic service).
When unpacking the apparatus, take great care of the
measurement probe.
This packaging contains the SDmatic with its supply cable, its
accessories and a user's manual.
❏ The SDmatic is delivered and installed by a CHOPIN entitled
agent.
■ Composition
❏ The SDmatic (1) is supplied with:
- 2 reaction bowls (2),
- 1 pen for touch-sensitive screen (3) with a pen-holder,
- 2 spoons (4),
- 1 cleaning container (5) located on the left-hand side of the
SDmatic,
- 1 power supply cable (6),
- 1 plastic bottle (shaker) (7).
- 1 dropper (8) (for thiosulfate)
- 1 RS232 cable (9) to connect the SDmatic to a computer.
- 1 USB memory stick (10) with user's manual and software.
7
10
SDmatic
SDmatic
5
9
1
2
6
User's manual
12/2016