What's In The Box; Assembly - Protemp PT-80-OFR Manuel De L'utilisateur Et Mode D'emploi

Tools Needed:
- Phillips Head Screw
Driver
Carry Handle (1)
IMPORTANT: INSTALL HEAT SHIELD BEFORE OPERATING YOUR 80-OFR HEATER
1. Remove existing screws from shell ring on
either side of heater (see Figure 3) .
Figure 3
Figure 5
Heat Shield
© 2019 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
®

WHAT'S IN THE BOX

80-OFR
Black Screws (2)

ASSEMBLY

80-OFR
OR WHILE CONNECTED TO A POWER SOURCE
Attach the handle while still in the box for
easier unpacking (see Figures 1 and 2).
2. Line up holes on heat shield with holes in
shell ring. Attach with screws removed in step
1 (see Figures 4 and 5).
Figure 4
5
Kerosene Radiant Heater User's Manual
Figure 1 Figure 2