Maintenance And Storage; Sound Pressure; Sound Power - Toro Recycler Manuel De L'utilisateur

– whenever you leave the lawn mower.
– before refueling.
– before removing the grass catcher.
– before making height adjustment unless
adjustment can be made from the operator's
position.
• Stop the engine and disconnect the spark-plug wire.
– before clearing blockages or unclogging chute.
– before checking, cleaning or working on the lawn
mower.
– after striking a foreign object, inspect the lawn
mower for damage and make repairs before
restarting and operating the lawn mower.
– if lawn mower starts to vibrate abnormally (check
immediately).
• Watch out for traffic when crossing or near roadways.

Maintenance and Storage

• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Do not use pressure cleaning equipment on machine.
• Never store the equipment with gasoline in the tank
and inside a building where fumes can reach an open
flame or spark.
• Allow the engine to cool before storing in any
enclosure.
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and gasoline storage area free
of grass, leaves, or excessive grease.
• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Replace worn or damaged parts for safety.
• Replace faulty silencers.
• If the fuel tank has to be drained, do this outdoors.
• Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
• On multibladed lawn mowers, take care as rotating
one blade may cause others to rotate.
• Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving
blades and fixed parts of the lawn mower.
• To ensure the best performance and safety,
purchase only genuine Toro replacement parts
and accessories. Do not use
accessories; they may cause a safety hazard.

Sound Pressure

This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 85 dBA,
based on measurements of identical machines per EN
11094 and EN 836.

Sound Power

This unit has an equivalent continuous A-weighted
sound power level of 96 dBA, based on measurements
of identical machines per EN 11094.
Vibration, Hand/arm
This unit does not exceed a hand/arm vibration level of
4.9 m/s 2 , based on measurements of identical machines
per EN 1033.
3
will fit
parts and