Before Calling Your After Sales Service - Whirlpool W84BE 72 X Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 80
Repositioning the door
It is not possible to change the opening direction of your fridge door, if the door handles on your
fridge are installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any handles.
If the door opening direction of your fridge can be changed, you should contact the nearest
Authorised Service to have the opening direction changed.
BEFORE CALLING YOUR AFTER SALES
SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a
problem occurs in the appliance. Warning codes are displayed in the Freezer and Cooler Indicators.
ERROR TYPE
SR
SR – Set value
blink on freezer set
value screen
SR – Set value
Blink on cooler set
value screen
SR – Set value
blink on freezer
and cooler set
value screen
SR – Set value
blink on cooler set
value screen
"--"
MEANING
WHY
There is/are some
part(s) Out of order
"Failure Warning"
or there is a failure
in cooling process
This caution will be
Freezer comp.
seen especially after
Not Cold enough
long term of power
failure
Ideal temperature for
Ref. Compartment
"Refrigerator comp.
is +4 oC. If you see
Not Cold enough"
this warning your
foods have risk of
spoiling.
It is combination of
"not cold enough
"not cool enough"
Warning"
error for both of the
compartments.
The foods starts to
Refrigerator comp.
freeze because of
too Cold
the too much cold
temperature
When the power
supply gets lower
"Low voltage
than 170 V the
Warning"
appliance gets to
steady position.
EN - 57
WHAT TO DO
Call Service for assistance as
soon as possible.
1. Do not freeze the foods that
are thaw and use in short time
period.
2. Set the freezer temperature
to colder values or set the
super freeze , until the
compartment gets to normal
temperature.
3. Do not put fresh food until
this failure is off.
1. Set the refrigerator
temperature to colder values or
set the super cooling mode until
the compartment gets to normal
temperature.
2. Do not open the door much
until this failure is off.
You will see this failure when
first starting the appliance. It will
be off after the compartments
gets normal temperature
1. Check if the "Super cooling
mode" is on
2. Decrease the refrigerator
temperature values
This is not a failure. This
prevents any damages on
the compressor. This warning
will off after the voltage gets
required level

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W84be 72 x 2

Table des Matières