Fein GRIT GHB 15-50 Serie Mode D'emploi page 10

OBJ_BUCH-0000000179-005.book Page 10 Monday, March 19, 2018 10:06 AM
en
10
Character Unit of measure-
ment, international
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Intended use of the power tool:
Hand-guided grinder for belt grinding in weather-pro-
tected environments with the application tools and acces-
sories recommended by Fein.
This power tool is also suitable for use with AC genera-
tors with sufficient power output that correspond to the
Standard ISO 8528, design type G2. This Standard is par-
ticularly not complied with when the so-called distortion
factor exceeds 10 %. When in doubt, please refer to the
generator instruction/specification guide.
Special safety instructions.
Hold power tool by insulated gripping surfaces, because
the belt may contact its own cord. Cutting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Wear personal protective equipment. Depending on appli-
cation, use face shield, safety goggles or safety glasses.
Where appropriate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stopping small
abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by
various operations. The dust mask or respirator must be
capable of filtrating particles generated by your opera-
tion. Prolonged exposure to high intensity noise may
cause hearing loss.
While working, do not wear loose clothing, jewellery or
open, long hair. Despite protective devices, loose objects
can be snagged or caught by moving parts and lead to
injury.
Do not use worn, torn or heavily clogged grinding belts.
Handle grinding belts carefully and store them according
to the manufacturer's instructions. Do not bend or fold
grinding belts! Damaged grinding belts can tear, be flung
away and injure someone.
Never touch the running grinding belt and do not reach
under the protective guard. Danger of injury.
Unit of measure-
ment, national
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2 2
min, m/s
Always use the protective devices attached on the
machine. The protective devices must be securely
mounted to the machine in order to achieve maximum
safety. The protective devices are supposed to protect
the user from grinding particles thrown from the machine
and from accidental contact with the grinding belt.
Warning! Danger of fire and explosion! When grinding
metals (e.g., aluminium or magnesium), dust develops
that may be combustible or explosive. Do not operate the
machine near flammable materials. Sparks could cause
these materials to ignite.
Pay attention that other persons are not put at risk from
sparking. Remove flammable materials in close vicinity.
Sparking occurs when grinding metal.
Secure the work piece firmly. A work piece that is
gripped tightly in a clamping device or vice, is more
secure than if held by hand.
The surface being worked can become very hot. Do not
touch it with your hands.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal pro-
tective equipment. Fragments of workpiece or of a bro-
ken accessory may fly away and cause injury beyond
immediate area of operation.
Keep the power cord away from the grinding belt. When
losing control over the machine, the power cord can be
cut through or get caught, and your hand or arm can
come in contact with the grinding belt.
Never lay the power tool down until the grinding belt has
come to a complete stop. The grinding belt can come into
contact with the surface, causing you to lose control over
the power tool.
Do not run the power tool while carrying it at your side.
Your clothing may get caught through accidental contact
with the grinding belt and cause injuries.
Make sure that the grinding belt is mounted in accord-
ance with the manufacturers instructions. Mounted
grinding belts must be able to rotate freely. Incorrectly
mounted grinding belts can become loose during opera-
tion and be thrown from the machine.
Do not direct the power tool against yourself, other per-
sons or animals. Danger of injury from sharp grinding
belts.
Hold the power tool firmly. High reaction torque can
briefly occur.
Never touch the running grinding belt. Danger of injury.
Do not rivet or screw any name-plates or signs onto the
power tool. If the insulation is damaged, protection
against an electric shock will be ineffective. Adhesive
labels are recommended.
Explanation
Basic and derived units of measurement from the
international system of units SI.