Additional Safety Rules - Poulan Pro PP28RJ Manuel D'instructions

lems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition and the condi-
tion of this tool.
SPECIAL NOTICE:
with a temperature limiting muffler and spark
arresting screen which meets the require-
ments of California Codes 4442 and 4443. All
U.S. forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey, Ore-
gon, and Washington require by law that
many internal combustion engines be
equipped with a spark arresting screen. If you
operate in a locale where such regulations ex-
ist, you are legally responsible for maintaining
the operating condition of these parts. Failure
to do so is a violation of the law. For normal
homeowner use, the muffler and spark arrest-
ing screen will not require any service. After
50 hours of use, we recommend that your
muffler be serviced or replaced by your autho-
rized service dealer.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS
WARNING:
ment used, read entire instruction manual be-
fore use and follow all warnings and instruc-
tions in manual and on attachment.
WARNING:
installed when using brushcutter attachment.
Attach handlebar between arrows on safety la-
bel on the upper shaft (engine end of unit). If
your brushcutter attachment does not include a
handlebar, a handlebar
(#530071451) is available from your authorized
service dealer.
Handlebar
BRUSHCUTTER SAFETY
Blade can thrust violently away from material
it does not cut. Blade thrust can cause am-
putation of arms or legs.
CARTON CONTENTS
Check carton contents against the following list:
S Powerhead
S Attachment (with trimmer head installed)
S Cupped washer
S Large nut for installing blades
S Hex wrench
S Handlebar
S Bracket cover
S Bracket cover screws (2)
S 4- -point weed blade
This unit is equipped
For each optional attach-
Ensure handlebar is
accessory
ASSEMBLY
Do not use trimmer head as a fastening de-
vice for the blade.
The blade continues to spin after the trigger is
released or engine is turned off. The coasting
blade can throw objects or seriously cut you if
accidentally touched. Stop the blade by con-
tacting the right hand side of the coasting
blade with material already cut.
kit
WARNING:
starting unit. Remove all debris and hard ob-
jects such as rocks, glass, wire, etc., that can
ricochet, be thrown, or otherwise cause injury
or damage during operation.
S Throw away and replace blades that are
bent, warped, cracked, broken or damaged
in any other way.
S Install required shield properly before using
the unit.
S Use only specified blade and make sure it is
properly installed and securely fastened.
S Cut from your left to your right. Cutting on
the right side of the shield will throw debris
away from the operator.
S Always use the handlebar and a properly
adjusted shoulder strap with blade (see AS-
SEMBLY).
S Plastic shield
S Wing nut (screwed onto plastic shield)
S Shoulder strap with warning
S Container of oil
CAUTION:
nect spark plug before performing any as-
sembly procedures. If received assembled,
repeat all steps to ensure your unit is properly
assembled and all fasteners are secure.
Examine parts for damage. Do not use dam-
aged parts.
5
Inspect area before
Always stop unit and discon-