Festo ASI-MV-4A-Z Notice page 12

ASI-M..-...-Z
2
Connecting and display elements
PLEASE NOTE
The combi-sockets have different contact arrangements:
• • type ASI-MV-...: contact arrangement DIN 43650,
design B (e.g. Festo V-coils)
• • type ASI-MF-...: contact arrangement as per industrial
standard (e.g. Festo F-coils). This contact arrangement
can be turned 180° in order to simplify fitting.
12
Socket (design/arrangement of contacts
depends on order)
Yellow LED for solenoid coil
Fastening screw (max. 0.5 Nm)
Designation label (e.g. for address)
Numbering of output
Numbering of inputs
Sensor plug M12 for 2 sensors
Earth/ground connection M3
Operating voltage connection 24 V DC
(additional supply, only ...-Z-types, valves can
then be switched off during EMERGENCY
STOP. No power supply via AS-i bus)
BUS LED
(green)
On
Off
AS-i bus connection (AS-i plug)
Socket (design/arrangement of contacts as ordered)
Fastening screw (max. 0.5 Nm)
Designation label (e.g. for address)
Yellow LED for solenoid coil
Numbering of output
Type plate of combi-socket
(with AS-i IO code and ID code)
Meaning
AS-i voltage applied
No AS-i voltage on bus
9801b