Lindy 43167 Manuel Utilisateur page 3

User Manual
Introduction
This USB 3.1 hub with on/off switching function for each port provides 4 USB 3.0 SuperSpeed ports.
Package Contents

4 port USB 3.1 hub

USB 3.0 A to Micro-B Cable

This User Manual
Features

4 Port USB 3.1 Hub, backwards compatible with USB 2.0/1.1

Supports USB 3.1 SuperSpeed transfer rates up to 5 Gbps

Connectors: USB 3.0 Micro-B Female (for uplink connection), 4x USB 3.0 Type A Female for
devices

No driver needed, plug and play

ON/OFF switch for each port

Genesys Logic GL3520 chipset

Material: plastic housing

Colour: black

Socket for optional PSU 5V DC regulated
Installation & Operation
Use the provided USB cable to connect the hub to a free USB port on your computer. Your computer will
recognize the new hardware and install any required drivers automatically. Up to 4 USB devices can now
be connected to the hub.
Each device can be disconnected and re-connected by means of using the switches on the top of the
hub, without disconnecting and re-connecting the according USB cable from the hub.
The four blue status lights found on the top of the hub show if the port is active or not.
A USB 3.0 port can supply 900mA, depending on the requirement of the attached device, if you are
using multiple high power USB devices it may be required to attach an external power supply (not
included).
Benefits:
- perfect for external hard drives
- effective power management
- prevention of boot-problems
English