Philips S7000 Serie Mode D'emploi page 29

1
2
- The retaining ring has two recesses that fit exactly
1
5 Place new shaving heads in the holder.
Note: Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in the
shaving-head holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise.
in the projections of the shaving head holder. Turn
the ring clockwise until you hear 'click' and the ring
is fixed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder
on a surface when you do this, as this may cause
damage.
ENGLISH
29