Philips S7000 Serie Mode D'emploi page 29

1
3
2
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click').
Using the SmartClean system
Note: If you use the shaver with shaving foam or
gel, quickly rinse under warm water before
cleaning in the SmartClean system.
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.
1 Press the top cap to be able to place the shaver
in the holder ('click').
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system holder.
3 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
The battery symbol starts to flash, which
indicates that the shaver is charging.
29
English