dji Osmo Pocket Guide De L'utilisateur page 4

2. Power off Osmo Pocket, place it in the waterproof case as shown, and attach the anti-
fog insert (included).
3. Use the clamp to secure Osmo Pocket.
4. Tighten the securing ring. Press and hold button 1 to power on Osmo Pocket.
Make sure Osmo Pocket is powered off before placing it into the waterproof
case.
Make sure the securing ring is completely tightened. DJI takes no
responsibility for any damage or loss resulting from improper use of Osmo
Pocket underwater.
The camera cannot be adjusted when using with the waterproof case.
Make sure the anti-fog insert works properly. Replace the anti-fog insert
regularly.
Clean the waterproof case after using. Make sure the waterproof case is
clean at all times.
3