Singer SteamLogic Manuel D'instructions page 6

IMPORTANT: Before you start
ironing, read the garment labels
instructions that are often shown
using symbols similar to those at
right:
(If you are not sure what the fabric is
made of, begin ironing at Low (•) Setting.)
IRONING
1. Turn the Temperature Control Dial to the right to turn on
the appliance and select your desired temperature.
2. Depending on which temperature setting you have
selected, the corresponding temperture bars will blink.
When the iron is ready to use, the temperature bars will
stop blinking and stay on.
to position to generate steam for steam ironing.
generating steam.
6 – ENGLISH
Using Your SteamLogic Steam Iron
5. After use, turn the Temperature Control Dial to the left to
turn off device.
6. After every use, follow instructions in this manual to Drain
the Water Tank. It is recommended to drain the Water
Tank after each use.
Temperature Control Setting
• Acetate • Polyester
• Elastine • Silk
• Polymide • Triacetate
• Viscose
• Wool
-
up
• Cotton
• Linen