Image Recording - LaserLiner ThermoXplorer Pro Mode D'emploi

26.0
Media gallery / playback mode
In the media gallery, you can access all image data recorded with the thermal camera.
You can access the media gallery either via the menu or via hot key. To close the media
gallery, press the „ESC" hot key.
Open
Save
Measurement Save settings
Level/Span Auto Save
Setup Delete
File Format
If the „Trigger" button is set to „IR/Digital", you can use it to switch between the IR and
the corresponding digital image in playback mode. The display will remain blank if no IR
or digital image is available and „No IR Image" or „No Digital Image" will be shown.
26.1

Image recording

Image recordings of any measurement situation can be created for subsequent
documentation in the menu or with the „Trigger" button.
Open
Save
Measurement Save settings
Level/Span Auto Save
Setup Delete
File Format
1 sec
ThermoXplorer Pro
IR_1/(2/3)
Save
! The „Trigger" button must be
set to „Save" in order to record
images. Refer to Section 6.4.
Cancel
45
GB