HTRONIC PLS1000 Mode D'emploi page 66

PROgRAM: COnTROL
The following parameters are displayed in this menu:
PROgRAM: InTERvAL vEnTILATIOn (InTERvALL-LUEF.)
Temperatur T1
Feuchtigkeit 1 (F1) /
Taupunkt TP1 /
Abs. Feucht. 1 /
Temperatur T2
Feuchtigkeit 2 (F2) /
Taupunkt TP2 /
Abs. Feucht. 2 /
dTP=TP1-TP2
REL T1 timer
Interval On
Interval OFF
Einstellungen (nur lesend)... /
The parameters have the following meaning:
Temperature T1
Currently measured temperature at the indoor sensor (degrees Celsius)
Moisture F1
Currently measured relative humidity at the indoor sensor (Rh)
dew point TP1
Calculated dew point on the interior sensor (degrees Celsius)
Absolute humidity 1
Calculated absolute humidity at the internal sensor (g / m³)
Temperature T2
Currently measured temperature at outdoor sensor (degrees Celsius)
66 | 64 | 66 |
Modes/ programs/functions
Humidity 1 (F1)
dew point TP1
Absolute humidity 1
Humidity 2 (F2)
dew point TP2
Absolute humidity 2
Settings (read only) ..













