Prior To Use; First Use; Inserting Memory Card; Switching The Device On And Off - SilverCrest SMS 5.0 A1 Manuel D'utilisation Et Informations Sur Les Services

Prior to use

 Remove all protective foil from the device and accessories.
 Connect the plug of the supplied power supply adapter to the power supply connection [11] on
the rear of the multi scanner.
 Insert the power supply adapter in a mains socket that is always easily accessible.
WARNING! When laying the cable, make sure that nobody can trip over it.

First use

Inserting memory card

WARNING! Switch the device off before you insert or remove a memory
card.
You must insert a memory card to be able to save pictures. Proceed as follows:
Slide the memory card with the contacts upwards and pointing towards the multi scanner into the
memory card slot [6] until it snaps into place. To remove the memory card, press it lightly. The
memory card is ejected slightly and can be pulled out.

Switching the device on and off

To switch on the device, press the Power button [1] once briefly. The status LED [2] lights up blue
when the device is switched on. During the scanning process, the status LED [2] lights up red.
To switch off the device, press the Power button [1] again briefly.
SilverCrest SMS 5.0 A1
English - 93