Playback - SilverCrest SMS 5.0 A1 Manuel D'utilisation Et Informations Sur Les Services

SilverCrest SMS 5.0 A1

Playback

You start playback mode by pressing the Playback button [5].
If the following message is displayed on the screen [8] after pressing the Playback button [5], there
are still no images on the memory card.
The stored recordings are then displayed automatically in sequence in a slide show. Press the
OK/Capture button [3] to stop the slide show. You can then browse through the recordings
manually by pressing the button Right/Colour [14] or Left/ EV [16]. Press the OK/Capture button
[3] to start the slide show again.
Press the Mode button [4] twice in playback mode during the slide show or press it once if the slide
show has finished. The following options are available here:
Press the Mode button [4] to exit the menu. If changes were made to the image, these are
automatically applied when exiting the menu. To exit playback mode, press the Playback button
[5]. The device is now in record mode again.
102 - English
You must first create recordings to be able to
view them in playback mode. In this case,
please read the section "Recording" on page
98.
36 Rotate 90° clockwise
37 Rotate 90° anti-clockwise
38 Delete