Usb Mode - SilverCrest SMS 5.0 A1 Manuel D'utilisation Et Informations Sur Les Services

USB mode

You can transfer your images to a computer via USB. To do so, first connect the device to your
computer as follows:
 Connect the small connector of the supplied USB cable to the USB 2.0 port [12] of the multi
scanner.
 Connect the large connector of the supplied USB cable to a USB port on your computer.
WARNING! When laying the cable, make sure that nobody can trip over it.
Then press the Mode button [4] to access the main menu.
Select the option "USB mode" [23] using the buttons Right/Colour [14] or Left/EV [16] and confirm
your selection with the OK/Capture button [3]. The USB icon is then displayed in the centre of the
screen [8]. The computer sets up a removable storage medium via which you have access to the
images. After you have transferred the images to your computer, press the Power button [1]. The
USB mode is now terminated and the device switches itself off.
Alternatively, you can remove the memory card from the deactivated multi
scanner and transfer it via a memory card reader (if available). To remove the
memory card, press it lightly. The memory card is ejected slightly and can be
pulled out.
20 Select recording source
21 Format memory card
22 TV
23 USB mode
24 Energy-saving mode (automatic switch-off
after approx. 3 minutes)
SilverCrest SMS 5.0 A1
English - 103