Description Of The Machine - Hotpoint Ariston AQUALTIS AQD1171D 69ID Mode D'installation Et D'emploi

Description of the machine

GB
PORTHOLE DOOR
PORTHOLE DOOR
HANDLE
KICK STRIP
PORTHOLE DOOR
DETERGENT DISPENSER DRAWER
A
3
1
2
B
(supplied) be used for proper dosage.If powder detergent is
used, place the partition into slot B.
6
ADJUSTABLE FEET
Always use the handle to
open the porthole door (see
figure).
The detergent dispenser
drawer is located inside
the machine and can be
accessed by opening the
door.
For more information on
detergent measures, please
refer to the chapter entitled
"Detergents and laundry".
1. pre-wash compartment:
use powder detergent.
! Before pouring in the
detergent, make sure that
extra compartment 3 has
been removed.
2. main wash compartment:
If liquid detergent is used,
it is recommended that the
removable plastic partition A
DIRECT INJECTION SYSTEM
The washing machine features the innovative "Direct
CONTROL
Injection" technology that quickly solubilises the detergent
PANEL
and efficiently activates all the various components. The
system guarantees the complete use and dissolution of
the detergent, which is mixed with water before reaching
the garments. This ensures better cleaning results already
at low temperatures, providing significant energy savings
while perfectly protecting colours and fibres. The "Direct
Injection" technology is activated automatically in all the
cycles.
3. extra compartment: Bleach
! The use of extra compartment 3 excludes the pre-
wash function.
washing additives compartment: for fabric softener
or liquid additives. We recommend that the maximum
level indicated by the grille is not exceeded, and that
concentrated fabric softeners are diluted.
TOUCH CONTROL PANEL
Standby mode
This Washer-dryer, in compliance with new energy saving
regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF
the machine to start up again.
Consumption in off-mode: 0,5 W
Consumption in Left-on: 8 W
To adjust the settings, gently
press the icon inside the
sensitive (touch control) area
as illustrated in the figure.
button briefly and wait for