Physical Specifications - Breg POLAR CARE WAVE Mode D'emploi

PRODUCT SPECIFICATIONS

Physical Specifications

Weight:
Electromagnetic Immunity Test Table
Immunity Test
Electrostatic discharge (ESD)
Radiated RF EM fields
Proximity fields from RF wireless
communications equipment
Rated power frequency
magnetic fields
Electrical fast transients/bursts
Surge
Conducted disturbances induced
by RF fields
Voltage dips
Voltage interruptions
Note: UT is the mains voltage prior to application of the test level
5 lbs (2.3 kg) Empty, 16 lbs (7.3 kg) Filled
Basic EMC Standard IEC 60601 Test Level (Home Healthcare)
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-3
IEC 61000-4-8
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
IEC 61000-4-11
+/- 8 kV contact
+/- 2kV, +/-4kV, +/-8 kV, +/- 15kV air
10V/m
80 MHz - 2.7 GHz
80% AM at 1 kHz
Reference IEC 60601-1-2 table 9
30 A/m 50Hz or 60Hz
+/- 2 kV for power supply lines
100 kHz repetition frequency
+/- 0.5 kV, +/- 1 kV line-to-line
+/- 0.5 kV, +/- 1 kV, +/- 2 kV line-to-ground
3V
0.15MHz - 80 MHz
6V in ISM and amateur radio bands between
0.15 MHz and 80 MHz
80% AM at 1 kHz
0% UT 0.5 cycle
At 0, 45, 90, 135, 180, 225, 270, and
315 degrees
0% UT: 1 cycle
70% UT: 25/30 cycles
Single phase: at 0 degrees
0% UT: 250/300 cycles
21