Care And Maintenance; Technical Specifications; Special Accessories - Kärcher SE 5.100 Mode D'emploi

Note: Once the appliance shuts off, switch it off us-
ing the vacuum button, because the suction turbine
will otherwise start running again once you open
the appliance.
If you use a crevice nozzle:
 Attach and secure the adapter for wet/dry vacuum-
ing. Install the crevice nozzle directly to the adapt-
er.
 Switch on the vacuum process.
Finish operation
 Turn off the appliance.
 Drain the full container.
 Rinse the reservoir thoroughly with clear water.
 Separate handle, spray suction pipes and washing
nozzle, in order to do so, open the locking lever
(central position).
 Flush the accessories separately under running
water and let air dry.
 Leave the appliance open to let it dry.
Illustration
 Accessories storage: Suction hose, suction
pipes and accessories can be comfortably stored
on the appliance.
 Storing the appliance. Store the appliance in a
dry room.

Care and maintenance

Clean the spray nozzle
With an uneven spray jet.
Illustration
 Loosen nozzle attachment and pull out, clean or re-
place spray nozzle.
Clean the sieve in the fresh water reservoir
1 x year or as needed.
Illustration
 Clean sieve.
Clean flat fold filter
For heavy contamination:
Illustration
 Unlock and open the cover, remove flat fold filter,
remove grid and brush off filter.
Troubleshooting
No water exiting from nozzle
 Fill up fresh water reservoir.
 Sieve in the fresh water container clogged.
 Thermal protection switch has switched off the
pump as it was overheated. Switch off appliance
and let it cool down (approx. 20 - 30 min).
 Detergent pump defective, contact customer ser-
vice.
Spray stream uneven
 Clean the spray nozzle of the washing nozzle.
Insufficient vacuum performance
 Close the surrounding air separator at the handle.
 Accessories, suction hose or suction tubes are
clogged, please remove the obstruction.
 Filter bag is full: Insert new filter bag.
 Flat fold filter is contaminated, use filter cleaning
mechanism, remove the flat fold filter if heavily
soiled and clean it (see chapter "Cleaning flat fold
filter").
Detergent pump noisy
 Fill up fresh water reservoir.
Strong foam generation in the container
 Use the correct detergent from KÄRCHER.
Order no. 6.295-771.0 carpet cleaner RM 519.
Appliance is not running
 Plug in the mains plug.

Technical specifications

Voltage
1~50-60 Hz
Output P
nom
Output P
max
Mains fuse (slow-blow)
Sound pressure level
(EN 60704-2-1)
Weight (without accessories) 7,1
Subject to technical modifications!

Special accessories

Filter set (5 pc.)
Flat fold filter
Washer nozzle for cleaning uphol-
stery
Carpet cleaner RM 519 (1 l bottle)
International
Textile waterproofing-agent
Care Tex
RM 762
(0.5 l bottle)
International
– 10
EN
220 - 240 V
1200 W
1400 W
10 A
77 dB(A)
kg
Order No.
6.904-143.0
6.414-498.0
2.885-018.0
6.295-771.0
6.295-769.0
17