Cannon DIGI-TROLL 5 Manuel De L'utilisateur page 17

PRoGRAMInG THE DIGI-TRoLL 5
The Digi-Troll 5 contains four menus that enable you to program and customize its operation. Any changes made using
the menu system are automatically saved in permanent memory when the downrigger is turned off.
NOTE: The downrigger must be turned off with the power button for the settings to be saved.
The MENU key is used to enter each of the menus starting from the default screen (referred to as the depth screen).
The Menu System
The chart below summarizes the Digi-Troll 5' s menu system in the order of occurrence.
While programming, the UP key is used to increase the value and the DOWN key is used to decrease the value. During
programming, if there is no activity on the keypad for 7 seconds, the menu reverts back to the main screen.
Main Screen
PIC
Voltage
Menu
©2016 Johnson Outdoors Marine Electronics, Inc.
Menu
Line On
Menu
Reel
Menu
Run
oPERATInG THE DoWnRIGGER
Menu
Units
Menu
Run
Un/
Menu
Coated
Menu
Run
cannondownriggers.com | 17