Keypad - Cannon DIGI-TROLL 5 Manuel De L'utilisateur

oPERATInG THE DoWnRIGGER
DIGI-TRoLL 5 KEyPAD
The Digi-Troll 5' s keypad has six keys located below the display:
PoWER
The ON/OFF key functions:
• Turn the Digi-Troll ON - Simply press and release.
• Turn the Digi-Troll OFF - Press and hold power button
for three seconds.
MEnU
The Menu moves the display through up to four screens
for programming (see section on programming for details).
After 7 seconds of inactivity on the key pad, the screen
reverts back to the weight line out display.
UP
During manual operation, this key raises the weight when
pressed. In programming mode, the UP key increases
numeric values.
DoWn
During manual operation, this key lowers the weight when
pressed. In programming mode, the DOWN key decreases
numeric values.
WATER ZERo
The water zero key provides a reset option for depth.
When pressed and held, the line out count will reset
to zero.
AUTo UP
Press AUTO UP to raise the weight to the water zero set
point at any time. AUTO UP uses the speed 5 regardless
of your setting and cancels any other mode of operation
when used.
16 | cannondownriggers.com ©2016 Johnson Outdoors Marine Electronics, Inc.