Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE SEAT
Pull the Brake Handle (No. 49) up to loosen (see
Fig. 1
Fig 1). Keep your feet on the pedals as leverage,
then move the Cushion Frame (No. 4) to the
desired position. Push the Brake Handle (No. 49)
down to tighten (see Fig 2).
Fig. 2
HOW TO MOVE THE BIKE
Hold the Rear Stabilizer (No. 9) and lift the bike
until the wheels on the Front Stabilizer (No. 3)
touch the ground. Now you can move the bike to
the desired location with ease.
ADJUSTING THE RESISTANCE
72a
Adjust the resistance of the bike using the Tension
Control Knob (No. 72a). Increase the level of
resistance by turning the Tension Control Knob
(No. 72a) to the RIGHT (clockwise), decrease the
level of resistance by turning the Tension Control
Knob (No. 72a) to the LEFT (counter-clockwise).
ADJUSTING THE HEIGHT AND BALANCE
In order to achieve a smooth and comfortable ride,
you must ensure that the bike is stable. If you
notice that the bike is unbalanced during use, you
should adjust the end caps located beneath the
Rear Stabilizer (No. 9) by turning it clockwise.
14
Publicité
Table des Matières
