Sunny Health & Fitness SF-RB4616 Mode D'emploi page 11

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
Span
Ne
r to
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the Front Stabilizer (No. 3) to the
Main Frame (No. 1) using 2 Bolts (No. 20).
Tighten with Allen Wrench (No. 91).
Attach the Rear Stabilizer (No. 9) to the
Main Frame (No. 1) using 2 Carriage
Bolts (No. 19), 2 Arc Washers (No. 26)
and 2 Cap Nuts (No. 27). Make sure the
bolts have been tightly fastened. Tighten
with Spanner (No. 90).
STEP 2:
Attach the Seat Cushion (No. 63) to the
Cushion Frame (No. 4), making sure the
correct side is facing up. Use 4 Bolts (No.
28) and 4 Flat Washers (No. 23) to secure
the seat and tighten them with Allen
Wrench (No.91).
Attach the Backrest Cushion (No. 64) to
the Cushion Frame (No. 4) using 2 Bolts
(No. 29) and 2 Flat Washers (No. 23) as
shown in the diagram. Tighten with Allen
Wrench (No. 91).
10