Sunny Health & Fitness SF-RB4616 Mode D'emploi page 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
72b
72a
72b
12
STEP 5:
Attach the Cushion Frame (No. 4) to the
Main Frame (No. 1) using 4 Bolts (No. 22),
4 Spring Washers (No. 24), and 4 Flat
Washers (No. 23). Tighten with Allen
Wrench (No. 91).
Connect the Hand Pulse Sensor (No. 80)
with the Hand Pulse Wire 1 (No. 81), as
shown in the diagram.
STEP 6:
Note: Set the Tension Control Knob
(No.72a) at 1 to ensure enough wire length
to connect the Tension Control Wires
(No.72b & 73).
Insert the Tension Control Wire (No. 72b)
to Tension Control Wire (No. 73) as
shown in the diagram. Then connect the
Trunk Wire (No. 78) with the Sensor (No.
79) and connect the Hand Pulse Wire 1
(No. 81) with the Hand Pulse Wire 2 (No.
82).
Attach the Front Post (No. 2) to the Main
Frame (No. 1), making sure to align the
screw holes, using 4 Bolts (No. 21) and 4
Arc Washers (No. 26). Tighten with Allen
Wrench (No. 91).